|
|
|
|
8200 N. Austin Ave
 Morton Grove
IL 60053
USA
 Tel 847 966-3700
Fax 847 965-8379
|
|
|
|
ITT Introduces New Primary-Secondary Header
|
Morton Grove, IL--Jun 7, 2007
ITT has unveiled their new Bell & Gossett Primary-Secondary Header (PSH). The new PSH is a combination air
separator and manifold that creates independent primary and secondary circuits.
|
|
|
The new Primary-Secondary Header, also known as a low-loss header, includes a purge valve
allowing users to easily remove any debris collected at the bottom of the vessel. The valve
also allows an air vent to release air trapped in the system. The PSH features a reliable
steel body, brass air vents and drain valves and an epoxy resin painted steel body in all seven sizes.
|
The PSH has a working pressure of 150 PSI with an operating temperature ranging from 32 degree
Fahrenheit to upwards of 220 degree Fahrenheit. With a connection size between one and four inches,
the seven models of the Primary-Secondary Header have a maximum flow ranging between 11 and 247 GPM's.
The standard insulation on all models prevents water vapors from entering from the outside, eliminating
the formation of condensation on the body of the PSH.
Other Primary-Secondary Header features include;
· Hydraulically separation of primary and secondary circuits
· Separates air vents and from the system
· Separates and collects impurities in the circuits
· Provides ease of installation with no complicated piping
· Eliminates strainer, air vent, and air separator
|
|
|
|
Bell & Gossett is a brand of ITT Corporation, the leading manufacturer of centrifugal pumps,
hydronic specialties, heat exchangers, condensate handling equipment, and packaged systems
for variable and constant speed pumping, heat transfer and pressure boosting.
For more information contact ITT at 8200 N. Austin Avenue, Morton Grove, IL 60053;
phone 847/966-3700; fax 847/966-9052; or visit www.bellgossett.com.
|
|
|
