Booster Pump Service Manual & Troubleshooting Guide
Table of Contents

I.GENERAL FIELD SERVICE
2. Removing the Conduit Box Cover
WARNING: Electrical Shock Hazard Disconnect and lockout the power before servicing. Failure to follow these instructions could result in serious personal injury or death.
WARNING: Electrical Shock Hazard Be certain the electrical power is not present at the motor leads before continuing. Failure to follow these instructions could result in serious personal injury or death.
WARNING: Unexpected Start-Up Single phase motors are equipped with Automatic reset overload protectors. The pump can restart without warning. Disconnect and lockout power before Servicing. Failure to follow these Instructions could result in serious Personal injury or death.

Removing the Conduit Box Cover

The conduit box cover must be removed and all Electrical wires must be disconnected prior to Separating the motor from the bearing assembly. The photograph illustrates the removal of the Conduit box cover. This procedure is followed by The removal of the wire nuts and the flexible Conduit connector.

Previous Page Next Page