Booster Pump Service Manual

Booster Pump Service Manual & Troubleshooting Guide
Table of Contents

II. MOTOR MOUNT SERVICE

The following procedures illustrate and explain the operations that can be performed in the field. These operations are limited to the exterior of the motor. All repair work to the motor’s interior should be performed by an authorized Bell & Gossett Motor Repair Station. Information regarding the nearest B&G repair station can be obtained from your local B&G Representative.

1. Motor Mount Replacement

Motor Mount Replacement

The over/under brackets must be removed prior to servicing the motor mounts. these brackets can be separated by first removing the four clamp screws (there are two screws at each end of the motor) and then lifting one half from the other. This operation will leave the free standing motor.